General information：

Composition: epoxy resin, antirust pigment, constitution filler, auxiliary agent and solvent.

Application：Suitable for steel surface primer coating.

Color：Iron red, medium grey

Gloss: none

Performance introduction

Fast drying, high hardness, good nitro resistance, good adhesion to polyurethane, acrylic finish coating layers, mainly used on ordinary lathe, car chassis and other steel structure surface as primer.  

Construction instructions

Theoretical Dosage: 5.5㎡/㎏, (45 micron dry film, excluding loss)

Specific Gravity: About 1.6

Drying time：25℃  Touch dry ≤0.5h，Hard dry ≤24h

Mixing ratio：A:B=1:7

Potlife：Unlimited

Coating method：high pressure airless spray, brush, roll

Thinner：Exempt Solvent

Surface treatment: De-rusting to standard Sa2.5

Supporting paint: Following coating is polyurethane or acrylic coating, etc.

Cautions:

1 Coating shall be carried on at ambient temperature between 0℃ and 35℃. Minding weather changes. Under rainy, foggy, snowy days and relative humidity ≥85%, direct summer sunlight the application is prohibited. The substrate must be dry, otherwise it will bubble.

2 Adjust the viscosity with our exempt solvents. Thinners from other companies or other brands are not allowed to use, otherwise we will not be held responsible for any problems.

3 When coating finished, the cover of the packaging barrel must be tightly sealed to be air tight, otherwise it will fail to deteriorate. Avoid long-time inhalation of solvent vapor and fog. The working site should enhance ventilation.